News Details
Safety inspection steps for manual hydraulic forklifts
It is very important to conduct a safety check before using a manual hydraulic forklift. These inspections can help ensure the normal operation of forklifts and prevent accidents from occurring. Safety inspection steps for manual hydraulic forklifts.
We need to check if there is any leakage in the hydraulic cylinder of the manual hydraulic forklift. This can be done by observing whether there is liquid leakage from the hydraulic cylinder. If liquid leakage is found, it may be due to damaged seals or loose connections in the hydraulic cylinder, and it needs to be repaired or replaced in a timely manner.
We need to check if the pulley device of the manual hydraulic forklift is effective. This can be done by pushing the forklift and observing if the pulleys are rotating properly. If the pulley cannot rotate normally, it may be due to damaged pulley bearings or foreign objects getting stuck in the pulley, and it needs to be repaired or cleaned in a timely manner.
We need to check if there are any foreign objects wrapped around the pulley device of the manual hydraulic forklift. This can be done by observing whether there are any debris around the pulley. If there are debris tangled around, it may affect the normal rotation of the pulley and even cause the pulley to get stuck, which needs to be cleaned in a timely manner.
If any of the above inspections fail, we should prohibit the use of manual hydraulic forklifts. Because any non-compliance may increase the risk of accidents when using forklifts. Only when all inspections are qualified can we ensure the safe use of hydraulic manual forklifts.
The safety check before use is an important step to ensure the safe operation of manual hydraulic forklifts. We should take every inspection seriously to ensure that forklifts are used in good condition, thereby safeguarding our personal safety and work efficiency.